
As an Amazon Associate and affiliate partner, Menrva Books earns from qualifying purchases. Learn more
With increased interest in reducing emissions, the axial (sequential) stage combustion concept for gas turbine combustors and high exhaust gas recirculation rates for internal combustion engines are gaining in popularity. Despite the air-quality benefits of these technologies, introduction of inert combustion residuals into a combustion media affects the flame reactivity and stability. This dissertation examines the dilution effect on laminar flame characteristics of iso-octane/air, high/low research octane number gasoline/air, and methane/air mixtures through both experiments and numerical simulations.Spherically expanding flames under constant pressure are employed in an optically accessible constant volume combustion chamber to measure fundamental characteristics of premixed flames. Spherically expanding flames are severely affected by flame stretch in the early stage of combustion and therefore stretch models are of great importance in determining the uncertainty of experimental laminar flame speeds and burned gas Markstein lengths. In order to prevent the existing large scatter in experimental data of these two fundamental flame parameters, the effect of the lower radius limit for the flame speed calculation on extrapolation results of the stretch models is investigated in Chapter 3. Results show that there is a critical lower radius limit, where all laminar flame speed and burned gas Markstein length values obtained by the extrapolation of the stretch models converge to the same laminar flame speed and burned gas Markstein length.Chapter 4 presents the exhaust gas recirculation effect on CO2-diluted iso-octane/air and high/low research octane number gasoline/air mixtures at 1 bar and 373-473 K. The results of the measurements reveal that flame speeds of commercial gasolines do not vary significantly with the research octane number whereas the iso-octane flame speeds are consistently slower than those of gasoline. Numerical analyses are used to determine the di
This dissertation investigates the impact of dilution on the fundamental characteristics of laminar flames in various fuel-air mixtures. The research addresses the growing interest in emission-reducing combustion technologies like sequential stage combustion and high exhaust gas recirculation rates, which introduce inert residuals that affect flame reactivity and stability. Through experiments in an optically accessible constant volume combustion chamber and numerical simulations, the study examines spherically expanding flames of iso-octane/air, gasoline/air (high/low RON), and methane/air mixtures under constant pressure conditions. A key focus is the influence of flame stretch on experimental measurements and the determination of critical parameters for accurate extrapolation of stretch models.
This work presents a detailed experimental and numerical investigation into laminar flame characteristics under diluted conditions, relevant to emission reduction technologies. It addresses the critical issue of flame stretch and its impact on experimental data accuracy, proposing a method to converge key flame parameters. The research provides comparative data on different fuel types and their behavior under exhaust gas recirculation, contributing to a deeper understanding of combustion processes in engines and gas turbines.
Page Count:
233
Publication Date:
2021-01-01
Publisher:
Michigan State University. Mechanical Engineering
ISBN-13:
9798535596495
No comments yet. Be the first to share your thoughts!